Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Pete

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Disconnect the two antenna cables from the AirPort Extreme card, the iSight and inverter cables from the left side of the logic board, and the display data cable from the right side of the logic board.
[* icon_note] For A1229 and A1212 models, disconnect the three antenna cables from the AirPort Extreme card and the three connectors highlighted on the logic board. The order from left to right of the three A1229 cables is: Black (left; towards the edge of the case) — Grey (middle) — Blue (right; towards the middle of the case.
[* icon_note] For A1229 and A1212 models, disconnect the three antenna cables from the AirPort Extreme card and the three connectors highlighted on the logic board. The order from left to right of the three A1229 cables is: Black (left; towards the edge of the case) — Grey (middle) — Blue (right; towards the middle of the case.
[* icon_note] For the A1261 model, disconnect the two antenna cables from the AirPort Extreme card and the three connectors highlighted on the logic board.
[* black] Carefully peel the iSight and inverter cables off the top of the left fan and de-route the AirPort antenna cables from the channel in the left speaker.