Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Disconnect the two antenna cables from the Airport Extreme card, the iSight and inverter cables from the left side of the logic board, and the display data cable from the right side of the logic board.
[* icon_reminder] The Airport Extremeblack] For A1229 models, disconnect the three antenna cable withcables from the gray shielding attaches toAirPort Extreme card and the three connectors highlighted on the logic board.
[* black] Carefully peel the iSight and inverter cables off the top of
the left side connector, whilefan and de-route the cable withAirPort antenna cables from the white shielding attaches tochannel in the right sideleft speaker.
[* icon_reminder] The Airport Extremeblack] For A1229 models, disconnect the three antenna cable withcables from the gray shielding attaches toAirPort Extreme card and the three connectors highlighted on the logic board.
[* black] Carefully peel the iSight and inverter cables off the top of
the left side connector, whilefan and de-route the cable withAirPort antenna cables from the white shielding attaches tochannel in the right sideleft speaker.

Imagen 2

Ninguna imagen anterior

Añadido