Saltar al contenido principal

Changes to Step #6

Editado por Matthew Newsom

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.
[* black] Remove the Blu-ray drive from the PS3.
[* icon_caution] After you reinstall the Blu-ray drive, be sure the control board is firmly seated in the lower case before proceeding.
[* icon_note] If replacing the Blu-ray drive with a new drive, swap the circuit board from your old drive into the new drive.