Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #3

Editado por Jeff G

Edicion aprobada por David Hodson

Antes
Después
Sin cambios

Líneas de Paso

[* black] With the rear side of the device (the side with Ethernet connectors) facing you, carefully lift up the left side of the metal plateplate while keeping the right side of the plate near the top portion of the unit.
[* black] With the rear side of the device (the side with Ethernet connectors) facing you, carefully lift up the left side of the metal plateplate while keeping the right side of the plate near the top portion of the unit.
[* icon_caution] The fan is attached to the metal plate, and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* red] Disconnect the fan from the logic board. A spudger or tweezers may make it easier to do this.