Cambios al paso #3
Editado por John Bayley —
Edicion rechazada por Ryan Lutz
- Antes
- Después
- Sin cambios
Líneas de Paso
[* black] With the rear side of the device (the side with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate. |
[* icon_caution] The fan is attached to the metal plate, and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force. |
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the |
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the |