Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #3

Editado por Shelley

Edicion aprobada por Nick

Antes
Después
Sin cambios

Líneas de Paso

[* black] With the rear side of the device (withthe side with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* black] With the rear side of the device (withthe side with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* icon_caution] The fan is attached to the metal plate, and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the connector.