Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #3

Editado por Justin Rusk —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] With the rear side of the device (with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* icon_caution] The fan is attached to the metal plate, and connected to the motherboardlogic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the motherboardlogic board using a spudger or tweezers to pry the cable out of the connector.
[* icon_caution] The fan is attached to the metal plate, and connected to the motherboardlogic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the motherboardlogic board using a spudger or tweezers to pry the cable out of the connector.