Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #3

Editado por downwithvista

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] With the ethernet connectors facing you carefully open the unit like on the picture. I can best describe the opening technique as you would open a book from the rear cover.
[* black] Unplug the fan, a spudger can be of good use here.
[* icon_note] Unless you are replacing or working on the fan you don't need to unplug it.
[* icon_caution] The fan is connected to the motherboard next to the power connector. Don't lift the plate straight up or use force.force as you can ruin the connector or fan or both(and need to solder at board level or new logicboard)
[* icon_caution] The fan is connected to the motherboard next to the power connector. Don't lift the plate straight up or use force.force as you can ruin the connector or fan or both(and need to solder at board level or new logicboard)