Cambios al paso #1
Líneas de Paso
[* black] Place the unit upside down on your work surface. Use a cloth or similar object to protect it from scratches. |
[* black] Use a heat gun or hair dryer to heat the underside of the unit, in order to weaken the adhesives in the tape that hold it in place. |
[* black] Start in a [* icon_caution] Progress slowly so as not to tear the tape, but do not over heat the unit. [* icon_note] If you tear some of the tape, don't worry too much about |
[* black] Start in a [* icon_caution] Progress slowly so as not to tear the tape, but do not over heat the unit. [* icon_note] If you tear some of the tape, don't worry too much about |