Cambios al paso #1
Editado por James Smith —
- Antes
- Después
- Sin cambios
Líneas de Paso
[* black] Place the unit upside down on your work surface. Use a cloth or similar object to protect it from scratches. |
[* black] Use a heat gun or hair dryer to heat the underside of the unit, in order to weaken the adhesives in the tape that hold it in place. |
[* black] Start in a corner, it can be tricky to get a good grip at first. |
[* icon_caution] Progress slowly not to tear the tape, but do not over heat the unit. |
[* icon_note] |
[* icon_note] |