Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Ryan —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Place the unit bottom upupside down on your work surface. Use a cloth or similar object to protect it from scratches.
[* black] Use a heat gun,gun or hair dryer or similarto heat the underside of the unit, in order to weaken the adhesives in the tape that hold it in place.
[* black] Place the unit bottom upupside down on your work surface. Use a cloth or similar object to protect it from scratches.
[* black] Use a heat gun,gun or hair dryer or similarto heat the underside of the unit, in order to weaken the adhesives in the tape that hold it in place.
[* black] Start in a corner, it can be tricky to get a good grip at first.
[* icon_caution] Progress slowly not to tear the tape, but do not over heat the unit.
[* icon_note] You will tear some of the tape, don't worry too much about it. It will still hold in place fairly well.