Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por rousp

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Place the unit bottom up on your work surface. Use a cloth or similar to protect it from scratches.
[* black] Use a heat gun, hair dryer or similar in order to weaken the adhesives in the tape that hold it in place.
[* black] Start in a corner, it can be tricky to get a good grip at first.
[* black] Progress slowly not to tear the tape, but do not over heat the unit.
[* black] You will tear some of the tape, don't worry to much about it. It will still hold in place.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido