Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #2

Editado por Brett Hartt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] Orient the Xbox 360 S so that the hard drive port is facing up and the front panel is facing to the left.
[* black] Insert a metal spudger between the black bottom vent and the silver rim of the bottom bezel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent awayup from the bottom bezel.
[* black] Rotate the spudger away from the console, prying the vent awayup from the bottom bezel.
[* icon_note] Be sure to rotate the spudger far enough so that the clips on the vent are lifted past the silver rim of the bottom bezel.