Saltar al contenido principal

Cambios a Paso #2

Editado por Brett Hartt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] Orient the Xbox 360 S so that the hard drive port is facing up and the front panel is facing to the left.
[* black] Insert a metal spudger between the black bottom vent and the silver rim of the bottom panel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent away from the bottom panel.
[* icon_note] Be sure to rotate the spudger far enough so that the clips on the vent clear the silver rim of the bottom panel.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido