Saltar al contenido principal

Cambios a Paso #8

Editado por Matthew Newsom

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] Turn the console around so that the front panelfaceplate is facing to the right and the right panelcase is facing toward you.
[* black] Insert the spudger into the rear-most slit on the right edge of the bottom bezel, and wedge it behind the clip by pushing the spudger down while pushing the tip of the spudger against the right panelcase.
[* icon_note] Turn the console around so that the front panelfaceplate is facing to the right and the right panelcase is facing toward you.
[* black] Insert the spudger into the rear-most slit on the right edge of the bottom bezel, and wedge it behind the clip by pushing the spudger down while pushing the tip of the spudger against the right panelcase.
[* black] Simultaneously release the clip and pull the bottom bezel up.
[* icon_note] This clip is especially hard to remove. Some force will be required to insert the spudger correctly.