Saltar al contenido principal

Cambios a Paso #7

Editado por Matthew Newsom

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert a metal spudger through the left middle slit of the bottom panelbezel, and underneathbetween the bottom inside edge of the clip, as described previouslyclip and the left panel.
[* black] Simultaneously pull up on the bottom panelbezel up and rotate the spudger away from the console to free the clip.
[* black] In a similar fashion, free the clip at the front of the bottom panel'sbezel's left edge.
[* icon_note] The entire left side of the bottom platebezel should now be free.
[* black] Insert a metal spudger through the left middle slit of the bottom panelbezel, and underneathbetween the bottom inside edge of the clip, as described previouslyclip and the left panel.
[* black] Simultaneously pull up on the bottom panelbezel up and rotate the spudger away from the console to free the clip.
[* black] In a similar fashion, free the clip at the front of the bottom panel'sbezel's left edge.
[* icon_note] The entire left side of the bottom platebezel should now be free.