Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #7

Editado por Brett Hartt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] InInsert a metal spudger through the left middle slit of the bottom panel, and underneath the bottom inside edge of the same mannerclip, as described above, releasepreviously
[* black] Simultaneously pull up on
the clips in the middlebottom panel and rotate the spudger away from the console to free the clip.
[* black] In a similar fashion, free the clip at the
front of the bottom panel's left edge.
[* icon_note] The entire left side of the bottom panelplate should now be freelfree.
[* black] InInsert a metal spudger through the left middle slit of the bottom panel, and underneath the bottom inside edge of the same mannerclip, as described above, releasepreviously
[* black] Simultaneously pull up on
the clips in the middlebottom panel and rotate the spudger away from the console to free the clip.
[* black] In a similar fashion, free the clip at the
front of the bottom panel's left edge.
[* icon_note] The entire left side of the bottom panelplate should now be freelfree.