Saltar al contenido principal

Cambios a Paso #6

Editado por Matthew Newsom

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] Start in the rear left corner of the device, below the hard drive slot. This clip is not one of the clips marked in red.
[*
black] Insert a metal spudger through the slit atnear the rear left corner of the bottom platebezel.
[* black] Simultaneously pull up on the top panel and rotateRotate the spudger away from the console to freedevice while lifting the rear bezel up with the clipother hand.
[* icon_note] Start in the rear left corner of the device, below the hard drive slot. This clip is not one of the clips marked in red.
[*
black] Insert a metal spudger through the slit atnear the rear left corner of the bottom platebezel.
[* black] Simultaneously pull up on the top panel and rotateRotate the spudger away from the console to freedevice while lifting the rear bezel up with the clipother hand.
[* icon_note] You may hear a "pop" signifying the clip has cleared its catch.