Saltar al contenido principal

Cambios a Paso #1

Editado por Brett Hartt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] OrientIn the Xbox 360 S so thatfollowing steps, you will remove the hard drive portbottom vent. It is facing up and the front panel is facingattached to the left.
[* black] Insert a metal spudger between the black
bottom vent and the silver rim of the bottom panel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent away from the bottom panel.
[* icon_note] Be sure to rotate the spudger far enough so that
panel by the seven clips on the vent clear the silver rim of the bottom panelshown.
[* icon_note] OrientIn the Xbox 360 S so thatfollowing steps, you will remove the hard drive portbottom vent. It is facing up and the front panel is facingattached to the left.
[* black] Insert a metal spudger between the black
bottom vent and the silver rim of the bottom panel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent away from the bottom panel.
[* icon_note] Be sure to rotate the spudger far enough so that
panel by the seven clips on the vent clear the silver rim of the bottom panelshown.

Imagen 1

Ninguna imagen anterior

Añadido