Saltar al contenido principal

Cambios a Paso #10

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereAfter the logic board assembly is out, the reset and power button covers can easily be removed.
[* black] Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.
[* icon_note] Ejecting a cartridge is accomplished by pushing an inclined plane underneath the cartridge until it pops off the connector attached to the board
.
[* black] Insert wisdom hereAfter the logic board assembly is out, the reset and power button covers can easily be removed.
[* black] Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.
[* icon_note] Ejecting a cartridge is accomplished by pushing an inclined plane underneath the cartridge until it pops off the connector attached to the board
.