Saltar al contenido principal

Cambios a Paso #8

Editado por valor

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.
[* black] It may be easiest to insert a spudger at the top, and work it around the edges, spreading gently as you go.
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame.
[* icon_caution] Be careful, if the home button sticks to the front panel you may tear the home button cable.
[* black] Do not flip the front glass away from the frame. Doing so may result In damage to the digitizer cable.