Saltar al contenido principal

Cambios a Paso #8

Editado por pwinia

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame.
[* black] Be careful, the home button may stick to the front panel, and you may tear the home button cable.