Saltar al contenido principal

Changes to Step #2

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Borrada
Añadida
Sin cambios

Step Lines

[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then
[* icon_note] Pry from
the top and bottom of the connector. Do not pryconnector bracket—there isn't as much of an overhang on the sidessides, and you may damage the connector.
[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then
[* icon_note] Pry from
the top and bottom of the connector. Do not pryconnector bracket—there isn't as much of an overhang on the sidessides, and you may damage the connector.
[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.
[* black] Remove the metal clip covering the antenna connector.