Saltar al contenido principal

Changes to Step #2

Editado por jonathancleghorn

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then the top of the connector. Do not pry the sides.
[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then the top of the connector. Do not pry the sides.
[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.
[* black] Remove the metal clip covering the antenna connector.