Skip to main content

Changes to Step #2

Editado por revher

Edicion rechazada por Jake Devincenzi

Sin cambios

Step Lines

[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.
[* black] Remove the metal clip covering the antenna connector.
[* black] If you only need to remove the rear camera, the next step is not mandatory. Once the battery is disconnected, it is useless (and difficult) to remove entirely the battery.