Skip to main content

Changes to Step #3

Editado por jwkc2

Edicion aprobada por Jake Devincenzi

Borrada
Añadida
Sin cambios

Step Lines

[* black] Use the clear plastic pull tab to gently lift the battery out of the iPhone.
[* black] You might find it easier to pry the battery out from the right-hand side because no glue is used on this side.
[* black] Remove the battery.
[* icon_caution] Do not remove the plastic tab from the iPhone.
[* icon_note] Before reconnecting the battery connector, be sure the pressure contact (shown in red) is properly positioned next to the battery connector.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as Windex (96% ethanol alcohol works well too, but make sure that contacts are dry when done). The oils on your fingers have the potential to cause wireless interference issues.