Saltar al contenido principal

Changes to Step #3

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Borrada
Añadida
Sin cambios

Step Lines

[* black] Use the clear plastic pull tab to gently lift the battery out of the iPhone.
[* icon_caution] Do not remove the plastic tab from the iPhone.
[* icon_note] You may need to use a plastic opening tool to loosen the adhesive under the battery.
[* red] Remove the contact clip from the iPhone.
[* black] Before reconnecting the battery connector, be sure the pressure contact (shown in red) is properly positioned next to the battery connector.
[* icon_note] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.

Imagen 3

No hay imagen previa

Añadida