Saltar al contenido principal

Cambios a este Paso

Editado por Olli

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Use an iPod opening tool to carefully pry the battery connector up from the ends closest to the top and bottom edges of the iPhone.iPhone
[* icon_caution] Doblack] watch out not pry againstto damage the antenna pressure contact.contact
[* black] Removeremove the pressureantenna contact from
[* icon_caution] Upon re-assembly: Make sure all metal-to-metal contact points of the antenna contact as well as its contact point on the rear panel are fat free. If necessary, clean them with a de-greaser such as windex. The oils on your fingers have
the iPhonepotential to cause wireless interference issues.
[* black] Use an iPod opening tool to carefully pry the battery connector up from the ends closest to the top and bottom edges of the iPhone.iPhone
[* icon_caution] Doblack] watch out not pry againstto damage the antenna pressure contact.contact
[* black] Removeremove the pressureantenna contact from
[* icon_caution] Upon re-assembly: Make sure all metal-to-metal contact points of the antenna contact as well as its contact point on the rear panel are fat free. If necessary, clean them with a de-greaser such as windex. The oils on your fingers have
the iPhonepotential to cause wireless interference issues.