Saltar al contenido principal

Changes to Step #1

Editado por Dennis Jengo

Edicion rechazada por David Hodson

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.board.''' screw #3'''
[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.board.''' screw #3'''
[* icon_note] Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo.