Saltar al contenido principal

Changes to Step #1

Editado por Jake Devincenzi

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has
[* icon_note] Some devices may have
two screwsscrews, one of which holds down the contact pad which is located above the screw indicated in red in the photo.
[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has
[* icon_note] Some devices may have
two screwsscrews, one of which holds down the contact pad which is located above the screw indicated in red in the photo.