Saltar al contenido principal

Changes to Step #1

Editado por av8or2

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has two screws one of which holds down the contact pad which is located above the screw indicated in red in the photo.
[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has two screws one of which holds down the contact pad which is located above the screw indicated in red in the photo.