Saltar al contenido principal

Changes to Step #1

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo.
[* black] Use a plastic opening tool to gently disconnect the battery connector from its socket.

Imagen 2

Ninguna imagen anterior

Añadido