Saltar al contenido principal

Cambios a Paso #1

Editado por Jon Bailey

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following screws securing the antenna plate to the mini:
[* red] Two 6.6 mm T8 Torx screws ''(Note: these screws are connected to the hard drive)''
[* red] Two 6.6 mm T8 Torx screws ''(Note: these screws are connected to the hard drive)''
[* orange] Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either will work)