Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Cambios al paso #4

Editado por 040304

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] 1.) Take the good end of the existing wire and strip it.
[* black] 2.) The interior wire, which is coated in white should be soldered on a square metal plate about one eighth inch square. This plate is opposite a small chip for reference.
[* black] 3.) The braided wire coats the white interior wire, and is wrapped around it in two different directions. This wire should be peeled off and then twisted together.
[* black] 4.) Then solder it in place opposite the chip and the other wire.

Imagen 1

Ninguna imagen anterior