Saltar al contenido principal

Cambios al paso #2

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Cut the wire of the magsafe some distance back from the manetic end. I used about 4 inches but in reality you can get much closer like maybe an inch, as you will see in the next step.
+[* black] Use wire cutters to cut the wire of the magsafe some distance back from the manetic end. I used about 4 inches but in reality you can get much closer like maybe an inch, as you will see in the next step.