Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* blackicon_note] In the following steps, you will use a heat gun to soften the adhesive securing the underside of the LCD panel to the inner case. The area the adhesive is applied to is shown in red in the second picturepicture (with the LCD removed).
[* black] Use your heat gun to soften the adhesive under the LCD panel along theits left edge.
[* blackicon_note] In the following steps, you will use a heat gun to soften the adhesive securing the underside of the LCD panel to the inner case. The area the adhesive is applied to is shown in red in the second picturepicture (with the LCD removed).
[* black] Use your heat gun to soften the adhesive under the LCD panel along theits left edge.