Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereIn the following steps, you will use a heat gun to soften the adhesive securing the underside of the LCD panel to the inner case. The area the adhesive is applied to is shown in red in the second picture.
[* black] With the heat gun set to low, start by heating the near the upper right corner of the LCD panel
.
[* black] Insert wisdom hereIn the following steps, you will use a heat gun to soften the adhesive securing the underside of the LCD panel to the inner case. The area the adhesive is applied to is shown in red in the second picture.
[* black] With the heat gun set to low, start by heating the near the upper right corner of the LCD panel
.

Imagen 2

Ninguna imagen anterior

Añadido