Saltar al contenido principal

Cambios a Paso #6

Editado por David Ramsey

Edicion aprobada por David Ramsey

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Solder the Pickup Wire
[* black] Coat the tip of your soldering iron with new solder.
[* black] Coat the exposed pickup wire with solder.
[* black] Melt the solder that is still on the selector switch terminal and quickly set the pickup wire onto the terminal.
[* black] Press the tip of the soldering iron onto the pickup wire until the solder melts and molds with the solder on the terminal.
[* black] Let the solder cool and become solid.
[* black] Lightly tug on the pickup wire to test the strength of the solder.
[* black] If the connection appears solid, reassemble the pickguard in reverse order.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido