Saltar al contenido principal

Cambios al paso #3

Editado por Nathan Smith

Edicion aprobada por Nathan Smith

Antes
Después
Sin cambios

Líneas de Paso

[title] Prepping Keyboard For Removal
-[* red] Use the Phillips #00 Screwdriver to remove the four screws from each corner of the keyboard.
+[* red] Use the Phillips #00 Screwdriver to remove the four 1 cm screws from each corner of the keyboard.
[* black] Gently lift the keyboard from the rear panel.
[* icon_note] Notice that the keyboard is still connected to the motherboard by two ribbon cables.