Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por gatortpk

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.
[* black] Lift the clutch cover out of the display assembly.
[* icon_reminder] During reassembly, make sure not to pinch the pink andbacklight cable (with the white inverter cableconnector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)
[* icon_reminder] During reassembly, make sure not to pinch the pink andbacklight cable (with the white inverter cableconnector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)