Cambios al paso #1
Editado por Walter Galan —
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Use a spudger to carefully disconnect the microphone cable from the logic board. You'll want to work from side to side, and slowly wiggle the connector out of its socket. |
|---|---|
| + | [* icon_caution] Pulling on this connector vertically will break the socket off the logic board. This connector should be removed horizontally by gently pulling the microphone cable toward the screen while working a spudger between the connector and the socket. |
Imagen 1
Ninguna imagen anterior
Añadido