Saltar al contenido principal

Cambios al paso #1

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* black] Remove following six screws securing the LCD to the rear display bezel:
+ [* red] Four 3.4 mm Phillips.
+ [* orange] Two 3 mm Phillips.
+[* icon_caution] Do not try to remove the LCD yet. The circuitry along its lower edge is wedged in a gap along the lower edge of the display recess in the plastic display assembly.
+[* black] Hold the display vertically and tip it enough to grab the top edge of the LCD and rotate it slightly out of the display assembly, being careful not to break the circuitry off its lower edge.

Imagen 1

Versión Antigua

Nueva Versión