Saltar al contenido principal

Cambios al paso #4

Editado por Josh Forester

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use the iPod opening tools (or your fingernails) to remove the skeleton by running along the seam bit by bit. It's easiest to start somewhere in the middle, then work your way across the top.
-[* black] The skeleton is held by plastic clips, so be careful since you don't want to break these.
-[* black] Carefully lift the skeleton from the back.
+[* black] Use the iPod opening tools (or your fingernails) to remove the hosuing by running along the seam bit by bit. It's easiest to start somewhere in the middle, then work your way across the top.
+[* black] The housing is held by plastic clips, so be careful since you don't want to break these.
+[* black] Carefully lift the front housing from the back.