Saltar al contenido principal

Cambios al paso #6

Editado por Alex Scott

Edicion aprobada por David Hodson

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place the new speakers into the circular mold that held the old speakers, making sure to align the notch inside the molds with the indents on the outer rim of the speakers.
[* black] Place the new speakers into the circular mold that held the old speakers, making sure to align the notch inside the molds with the indents on the outer rim of the speakers.
[* black] Replace the two metal brackets and all four screws—one bracket and two screws for each speaker—to keep the speakers in place.
[* black] InsertHolding them such that the visible metal contacts are facing up, insert the white plastic end of each speaker wire into their respective connectionsconnection ports on the circuit board.
[* black] InsertHolding them such that the visible metal contacts are facing up, insert the white plastic end of each speaker wire into their respective connectionsconnection ports on the circuit board.
[* black] Replace the tape securing the wires to the panel.
[* icon_note] ''IfNOTE: If you doare not wish to replacereplacing the keyboard, proceed to Step 9: Reassembling the Sound Panel"Step 8".''
[* icon_note] ''IfNOTE: If you doare not wish to replacereplacing the keyboard, proceed to Step 9: Reassembling the Sound Panel"Step 8".''