Saltar al contenido principal

Cambios a Paso #5

Editado por Jay Meadows

Edicion aprobada por Jay Meadows

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Rotate the camcorder so that the tape compartment is facing you.
[* black]
Remove the single 4.5mm black screw, which isscrew above the hook for the hand strap.
[*

[*
black] It may help you during this step to undoUndoing the strap on one endend may help.
[* black] Next, rotateRotate the camcorder so that the lens is facing you.
[* black]
Remove the single 4.5mm black screw from the front panel.
[* black] Rotate the camcorder so that the tape compartment is facing you.
[* black]
Remove the single 4.5mm black screw, which isscrew above the hook for the hand strap.
[*

[*
black] It may help you during this step to undoUndoing the strap on one endend may help.
[* black] Next, rotateRotate the camcorder so that the lens is facing you.
[* black]
Remove the single 4.5mm black screw from the front panel.