Saltar al contenido principal

Cambios al paso #1

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* black] Use your hot iOpener to heat up all four edges of the front panel. Let is rest on each side for at least 90 seconds, microwaving for 60 seconds at a time as needed.
+ [* icon_note] Take your time and ensure the entire bezel is warm. The more time you spend on this, the less time you'll spend picking out glass shards in the next steps.
+[* black] Once all of the adhesive is warmed, pick out the edge with the largest uncracked section of glass.
+[* icon_note] Try using a suction up to pull up on this section, and then wedge a guitar pick beneath the glass.
+ [* icon_note] If the glass is too badly cracked for the suction cup to grab, apply more heat and force the pick in, careful not to damage the LCD.

Imagen 1

Versión Antigua

Nueva Versión