Cambios a este Paso
Editado por Philip Le Riche —
Edicion aprobada por Philip Le Riche
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] The plastic gears, guides, guide grooves and sliding surfaces may be lubricated if necessary with a smear of silicone grease, but take care not to get any on the contacts of any of the ribbons. | |
| [* black] The lens must be reassembled starting with the silver barrels and working outwards, and ending with the outermost shell. | |
| [* black] The lens must be reassembled in the extended but not zoomed state. | |
| - | [* black] If the image stabilisation cell is removed, its 2 ribbons must be fed through a slot in the outer shell once the lens is reassembled except for the back plate. This is only possible with the lens extended. |
| + | [* black] If the image stabilisation cell is removed, its 2 ribbons must be fed through a slot in the outer shell once the lens is fully reassembled except for the back plate. This is only possible with the lens extended. |
| [* black] When you get stuck (you ''will ''get stuck!), put it to one side, sleep on it, maybe dream about it, and come back a day or two later. | |
| [* black] Once reassembled, test the lens with a 3v battery pack as previously described, and leave it in the fully retracted state before refitting to the camera. |