Cambios al paso #14
Editado por Philip Le Riche —
Edicion aprobada por Philip Le Riche
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] On the bottom left hand side of the lens assembly there is a connector with a red and a black wire going to the speaker. Disconnect this, taking care not to strain the wires or the ribbon that the socket is mounted on. | |
| [* black] At the rear top left hand side of the lens assembly is a ribbon cable connecting it to the flash module. Disconnect this. | |
| + | [* black] (Note the transparent protective insulation covering the flash board just below this connector. Do not remove this as the board may still have a dangerous high voltage on it from the flash capacitor behind.) |
| [* black] Remove a screw from the top right hand side of the flash module, and separate the flash module from the lens assembly. | |
| [* black] (On reassembly, hold the flash head closed while refitting it to the lens assembly.) |