Cambios al paso #10
Editado por Philip Le Riche —
Edicion aprobada por Philip Le Riche
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] The previous step revealed the main logic board beneath the buttons board. |
|---|---|
| - | [* black] Disconnect 2 ribbon cables from the main logic board, which connect to the LCD. The socket of the wider one has a clamping bar (black) which you have to gently lift. |
| + | [* black] Disconnect two ribbon cables from the main logic board, which connect to the LCD. The socket of the wider one has a clamping bar (black) which you have to gently lift. |
| [* black] Lift off the LCD. Note that this is secured on the left hand side by double-sided tape. Gently lifting the LCD right hand side, the double sided tape will slowly unstick. Don’t rush it - it'll come in its own good time. |