Saltar al contenido principal

Cambios al paso #3

Editado por Angelo

Edicion aprobada por Angelo

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Disconnect the blue wire connecting the logic board to the LCD screen.
-[* yellow] Disconnect the orange wire using a spudger while pushing out horizontally.
-[* blue] Disconnect the red capped wire from the logic board.
-[* black] Lift the logic board and lens (still connected) out of the back case.
+[* red] Detach the blue ribbon cable from the logic board.
+[* yellow] Detach the orange ribbon cable from the logic board, by using a spudger, and while pushing it out horizontally.
+[* blue] Detach the red-capped wire from the logic board.
+[* black] Lift the logic board and lens (still connected) out of the back cover.